Nissan Titan trucks recalled for risk of fire, stalled engine

Franklin, TN – December 30, 2020 – Nissan Motor Company (NASDAQ:NSANY) has recalled 7,583 Titan pickup trucks due to an exposed engine wire. The wire may cause an electrical short, which could give rise to a fire. It could also result in the car stalling, increasing the risk of a crash.

The recall includes 2020 Nissan Titan and Nissan Titan XD pickup trucks.

Recall summary  

The engine wiring harness is a group of wires, connectors and terminals that operate each truck’s electrical system. Due to a supplier error in the assembly process, the wiring harness may include an exposed wire.  The issue could cause an electrical short, which could bring about an engine fire or negatively affect engine performance. The latter could result in the car stalling while out on the road, “without the ability to restart.”


Both an engine fire and a stalled engine could put the car occupants, other motorists and even pedestrians at the risk of getting hit, injured or worse.

For tips on what to do if your car stalls, please see our article about a recent Chrysler recall for a similar issue. For information on steps you need to take in the event of a fire, please refer to our article about a recent BMW recall for contaminated battery, which also created significant fire risk.

The repair

To fix the issue, dealers will need to inspect the engine harness and determine if there are any exposed engine wires. The engine harness will be replaced free of charge, if necessary.  Nissan expects the recall to begin January 27, 2021.

Is your vehicle part of this recall?

Over 7,500 vehicles are included in this Nissan Titan recall. To see if your car is one of them, use MotorSafety’s free vehicle lookup tool.

Ken BoydNissan Titan trucks recalled for risk of fire, stalled engine

Hyundai recalls over 120,000 cars over faulty engines that may catch fire

Fountain Valley, CA – December 16, 2020 – Hyundai (OTCMKTS: HYMTF) is recalling 128,948 cars because connecting rod bearings inside the engine may wear down and cause engine damage, increasing the risk of stalls or fires. The recall includes:

  • 2012 Hyundai Santa Fe SUVs
  • 2011-2013 and 2016 Hyundai Sonata hybrid cars
  • 2015-2016 Hyundai Veloster hatchbacks

Recall summary

The recall concerns the vehicles’ engine rod bearings, which help reduce friction between two moving parts in the engine. These cars’ bearings could become worn, which could damage the engine. The damage may even cause the engine rod to snap and the vehicle to stall.

Separately, engines in these recalled cars can catch fire after being punctured by the rod.

High rates of fires

The recall comes a week after NHTSA issued Hyundai a consent order requiring them to clean up their act in regards to safety, by developing better resources, tools, and practices for catching vehicle safety problems early. The consent order was the result of a three-year probe into Hyundai’s behavior regarding recalls of 2011 model year vehicles.

NHTSA is disciplining Hyundai for moving too slowly to recall vehicles with engine issues and high rates of fires, and for reporting inaccurate information to NHTSA regarding the recalls. According to the consent order, Hyundai must create a US safety office, develop better data analytics programs to detect safety issues, and build a new safety testing facility in the US.

Safety concerns

Stalling and fires are both significant safety issues. Owners of recalled cars should watch out for abnormal knocking noises from the engine, reduced engine power or hesitation, the check engine light, the oil pressure light, a burning smell, a visible oil leak, and smoke, which all may be signs of trouble with the rod bearings.

For tips on what to do if your vehicle catches fire, please see the following page.


This Hyundai engine recall is set to start in late January of next year. Dealers will inspect the engine  for any damage to the rod bearings. If it is damaged, the whole engine will be replaced. Hyundai will also be installing a software update designed to detect engine issues.

Is your vehicle affected by this recall?

Nearly 130,000 cars are included in this Hyundai motors recall. To see if your car is one of them, use MotorSafety’s free vehicle lookup tool.

Rebecca RandHyundai recalls over 120,000 cars over faulty engines that may catch fire

Two BMW Models Recalled for Faulty Components

Laguna Hills, CA – November 6, 2019 – BMW of North America recently announced that it will recall two different models – both sedans – due to potentially faulty engine components.

In all, 217 vehicles – 100% of which are expected to contain the defect – are involved in the recall, including:

  • 205 BMW 330i and 330i xDrive four-door sedans from the 2019 and 2020 model years
  • 12 BMW Z4 two-door sedan from the 2020 model year

It is expected that all of the recalled components may not have been produced within specifications.

The defect

All 217 vehicles in the recall were made with an engine that contains needle roller bearings for counterbalance shafts that may not have been properly installed initially.

Specifically, this started during the production process, which may have been out of specification, during set production periods that vary by model.

For the 330i and 330i xDrive models in the recall, this lasted from November 22, 2018 to August 26, 2019. For the Z4s, it stretched from May 24, 2018, to April 3, 2019.

Due to the potentially improper installation process, affected needle roller bearings could lead to the counterbalance shaft loosening, causing severe engine damage.

That, in turn, could lead to the engines in recalled vehicles shutting down, increasing the risk of a crash. Drivers would be able to notice if this happened to their vehicles because there would be a loud noise emanating from the engine compartment.

Timeline of events

In May 2019, BMW was made aware of two separate instances in which drivers of affected vehicles heard the aforementioned noises, right before their vehicles broke down.

The first of these involved a 2019 3 Series sedan that had been made in February, and the second, involving a vehicle outside the U.S., was made in April. Both vehicles had low mileages, and the engines were flagged for return, tear down and analysis. 

In June, BMW of North America conducted an engineering review  of both engines and initially found that the counterbalance shaft’s needle roller bearings may have been to blame for the breakdowns.

Further analysis included looking into the production process while the company continued to monitor other vehicles in the field.

During that analysis period, another similar breakdown, this time including a 5 Series sedan that was made in May, occurred in September.

The engineering review eventually found that the press-in force for some needle roller bearings of the counterbalance shafts was smaller than specified, and engine production records indicated which of these components were affected by the defect based on production dates.

That, in turn, allowed BMW to determine which vehicles to recall, and the voluntary order itself was made on October 8.

To date, the company has not received any reports of accidents or injuries related to the defect.

The solution

Owners of affected vehicles will be asked to bring their vehicles to authorized BMW dealers to have the engines replaced free of charge. These changes will be covered by the BMW New Vehicle Limited Warranty program and therefore will not require reimbursement.

Dealers received notification of the recall on October 15, and owners should get letters via First Class mail on or around December 6.

Check your car’s recall status using MotorSafety’s free vehicle lookup tool.

Sean ReyesTwo BMW Models Recalled for Faulty Components